Change a Flat Tyre Checklist
A flat-tyre routine in the order that keeps you safe, from pulling over to the final nut check.
A real, editable checklist below — tick, tap a line to rewrite, drag to reorder.
Tick the circles, tap any line to change it, drag the dots to reorder.
Saved in this browser. Send it to Clear to keep it on your phone.
Get this list on your phone
Point your phone's camera at the code.
Look in the car for the spare, jack and wrench before you need them. Parts Matter points out that many carmakers have dropped the spare and jack in recent years, and some cars carry only a repair kit, so check ahead. The steps below run from getting safe through loosening the nuts, lifting and swapping the wheel, and hand-tightening the nuts. Then you lower the car until the spare just touches down, tighten with the wrench in a crossing pattern, lower it fully and tighten once more. This list assumes a car with a spare. It leaves out repair kits and RVs. If you're not comfortable doing it, call roadside help.
Why these items are on the list
- Check spare, jack and wrench exist. Many carmakers have dropped the spare and jack, so look before you're stranded.
- Practise on every car you drive. Consumer Reports advises practising at least once on each car you drive; jack spots and tool access differ.
- Pull over somewhere flat and safe. A parking lot beats the shoulder, and the jack needs level, solid ground.
- Turn on hazard lights. Leave them on the whole time so other drivers can see you.
- Park and set the parking brake. Automatics go in Park, manuals in gear, then the brake.
- Warning triangle, not on motorways. RAC puts it 45 metres (147 feet) behind the car, and says not to on a motorway.
- Triangle distance on fast roads. Consumer Reports, a US guide, says farther back on high-speed roads. UK drivers: RAC says 45 metres, none on motorways.
- Chock the opposite wheel. Flat on the front left? Chock behind the rear right. Bricks or big rocks work.
- Get out spare, jack and tools. On minivans and some SUVs the spare may be stored under the vehicle and need lowering.
- Remove the wheel cover. Skip this if the lug nuts are showing. The manual says how it comes off.
- Find the locking wheel nut key. Some alloy wheels need a keyed socket, often kept with the spare or in the glove box.
- Loosen lug nuts, don't remove. Loosening them first, while the wheel's on the ground, makes removing them easier later.
- Position jack at the jack point. Check the owner's manual, and never rest it on plastic trim.
- Raise car until tyre clears. Leave room for the inflated spare. If anything feels unstable, lower it and reset the jack.
- Remove lug nuts, keep them together. Hold the wheel as the last one comes off, and park the nuts where they can't roll.
- Slide off flat, tuck it underneath. Les Schwab suggests laying it behind the jack, under the car, for added safety.
- Mount spare, valve stem facing out. Line the holes up with the wheel studs and push it on.
- Hand-tighten lug nuts. Les Schwab says by hand for now. The wrench comes once the car is partly lowered.
- Lower until spare touches down. Don't put the full weight on it yet.
- Tighten nuts in crossing pattern. Consumer Reports: alternate across the wheel like drawing a star, not around the circle, and repeat until it doesn't wiggle.
- Lower fully, remove jack, tighten. Then tighten the nuts firmly, again in a crossing pattern.
- Stow flat, tools and triangles. Pick up everything before you leave the roadside.
- Check the spare's pressure. Confirm it's up to spec before you drive off.
- Retighten nuts after a few miles. Drive a few miles, then give the lug nuts one more tightening.
- Go straight to tyre shop. Compact spares aren't for over 50 mph. Head to a tyre shop.
Keep it open on your phone at the roadside and tick as you go, so a stressful moment doesn't cost you a step.
When to use it
Read it through once before a road trip, then keep it handy for the day a tyre goes soft.